Werbung
PROBLEM
h
igerator and freezer do not sufficient-.
::: t
�
==•==.-- -
The bottom of the refrigerator compartment
Is wet or droplets are present.
Pi'iiince ofctropa or water on tfiii tiicli: wall
Of the rltfrigerator.
Presence of water in the vegetable drawer.
- - - �.T he
= - mo - to _ r _ ru _ n _ a _ co _ ntl � nu - oualy � - _ -
The temperature of some external parts is
high.
iThe fi'OZen fooif la thawing.
Condensation on the outside.
IFYOU ARE NOT SOLVED THE PROBLEM, CONTACTTHE SERVICE CENTER, PLEASE GIVE THE TYPE OF FAULT ANDTHE INFORMATI•
ON ON THE PLATE OF THIS APPARATUS TO INSIDE THE REFRIGERATOR COMPARTMENT:
• The model of equipment.
• The number of series.
TROUBLESHOOTING
CAUSE
• Door switch is blocked.
The doors are not closed.
• The doors are frequently opened
• Erroneous setting of the temperature.
• The refrigerator and freezer have been exce- • Wait for the stabilization of the temperature of
ssively filled.
• Surrounding temperature is too low.
• No electrical power.
• The rear of the appliance is too close to the- Move the appliance away from the wall (see
wall.
- .-. • =mmeous
se•ftlng of the temperature.
===
• Food In contact with the back wall.
• The freezing of too much fresh food causes a • Do not exceed the maximum amount to be
lowering of the temperature of the refrigerator
• Products that are not NoFrost:
the drain tube could be clogged.
• Lack of air circulation.
• Vegetables and fruits with too much moisture. • Place fruit and vegetables in plastic, such as
o oo
rs � a �, . � not
C lo 6
oo
� - - - - - - � �� •
=
=
=
=
=
• The doors are opened frequantly.
• Ambient temperature is very high.
• Thickness of frost than 3mm.
• Presence of the condensate drain pipe.
amt51enflemperature range be\oW
climate class of the product.
The compressor starts rarefy
• The freezer door is not closed.
• Environment too moist.
REMEDY
•The
• Check whether the appliance is switched
(see Temperature Adjustment).
that there Is
the
• Ensure
a current in
• Check that it is active.
• Check that the door and gaskets close
properly.
• Avoid unnecessary opening of the doors for a
period of time.
• Check the position of the knob or temperature
setting and, if it is possible, cool even more
(see Temperature adjustment)
the refrigerator or freezer.
• Check that the ambient temperature is in
accordance with what is indicated on the na
meplate (see Installation).
•The power cord is not properly plugged in.
• Check whether the appliance is switched off
(see Temperature adjustment)
• Ensure that in the home there is current.
Installation).
• Check the position oflt'ie knob or tempera re
setting (888 Temperature Adjustment) and, If
possl>le, decrease temperature settrlg.
• Separate the foo o from the back wall of the
refrigerator.
frozen {see Freezing).
• Clean the drain tube with a cotton-bud or the like
to allow the discharge of water.
• It Is not a cle'9ct (see Defrosting).
•Check that there is no obstruction on the glass
shelf which will prevent air circulation.
films, bags or containers.
e doors are C IO&ed and if the sears
;!n�
:i
• Avoid unnecessary open ports Jor a certain
period.
• Verify that the ambient temperature is in accor
dance with the specifications on the nameplate
(see Installation).
• Set the thermostat knob on low numbers/ Set
the display a warmer temperature.
• Defrost the unit (see Defrosting).
• It is normall: temperatures are high to prevent
the formation of condensation on certain parts.
• Make sure the door is closed and that the
gasket Is sealing properly.
• Move the unit in a less humid.
house.
Werbung
