Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ELECTRICAL CONNECTION
Warning:
Installation should only be performed by
installers and qualified technicians.
The appliance must be recess-fitted cor-
rectly to ensure electrical safety. The elec-
trical connections should be made before
the appliance is installed in its housing.
The oven must be connected via a stan-
dardised power cable with 3 conductors of
1.5mm² (1 live + 1 neutral + earth) which
must be connected to the network by
means of an IEC 60083 standard power
socket or via an all-pole cut-off device in
compliance with the installation rules.
Check that:
- the electrical installation has sufficient
voltage (220-240 Volts~ 16 Amps),
If the electrical installation in your home
requires any changes in order to connect
your appliance, contact a professional
electrician.
During maintenance operations, the
appliance must be unplugged from the
electrical grid; fuses must be switched off
or removed.
Caution:
The
safety
is connected to the appliance's
terminal and must be connected to the
installation's earth.
If the oven malfunctions in any way,
unplug the appliance or remove the fuse
corresponding to the sector where the
oven is hooked up.
wire
(green-yellow)
blue
Caution:
We cannot accept liability for any
accident or incident resulting from
non-existent, defective or incorrect
grounding.
8
Neutral
(N)
Phase
(L)
B l a c k , b ro w n
Terminal
or red
green yellow
Werbung
Inhaltsverzeichnis
