General Safety Guidelines; Technical Specifications - Suunto Tank POD Kurzanleitung

General Safety Guidelines

WARNING: You must read all relevant printed and online product documentation of
your instruments. Failure to do so may lead to improper use, serious injury or death.
WARNING: You must use the Suunto Flow Restrictor with Suunto Tank Transmitter.
Failure to use the restrictor can lead to injury if there is a failure in pressurized scuba gear.
NOTE: These installation instructions override any prior instructions you may have
received.
For your safety, use Suunto Wireless Tank Pressure Transmitter with the provided Suunto
Flow Restrictor. The restrictor should only be removed for cleaning or changing scuba
gear. The restrictor must be re-installed before using the transmitter again.
Suunto recommends that the installation or removal of the transmitter be done by a
Suunto authorized dealer or trained dive expert. Improper tools use and over tightening
could damage scuba equipment.
Ensure there are no other people in close proximity when you pressurize scuba gear.
If the transmitter does not connect to your dive computer, the transmitter must be
uninstalled. Do not leave a non-functioning transmitter attached to your scuba gear. Bring
the non-functioning transmitter to your nearest authorized Suunto dealer.

Technical Specifications

• Operating temperature: 0 °C to 40 °C / 32 °F to 104 °F
• Storage temperature: -20 °C to +50 °C / -4 °F to +122 °F
• Maximum depth of operation: 150 m / 492 ft (complying with EN 13319)
• Battery replacement and service interval: after 200 dives or 2 years
• Max. diameter: 40 mm / 1.57 in
• Length: 80 mm / 3.15 in
• Weight: 95 g / 3.4 oz
• Resolution: 1 bar / 1 psi
• Rated working pressure: 300 bar / 4000 psi
• Max. allowed pressure: 400 bar / 5800 psi
WARNING: Do not replace the battery yourself. Doing so will void the warranty.
Return your product to an authorized Suunto Dive dealer or Suunto Authorized Service
Center for servicing.
5
EN