Inhaltsverzeichnis
Werbung
Question 6
Red LED stays ON.
Answer 6
Red LED stays ON indicates a system error. Please press the
Question 7
Default to factory setting.
Answer 7
Default to factory setting will be applied when you lose your PIN code for sharing the device.
After defaulting, please follow the previous indications to reconnect the ChowHUB to
Wi-Fi network.
1. Tap the ChowHUB icon on the main page for 3 seconds and delete the ChowHUB
2. Open the ChowHUB, press the
R
3. Press the
button. When the Blue LED blinks, it means the ChowHUB is successfully defaulted.
Question 8
Change the PIN code.
Answer 8
Enter the operation page of the device in Chow! App Tap the (Device information) in the setting page
Tap (Pin code Setting) to set a new PIN code
Question 9
Change to another Wi-Fi network.
Answer 9
Enter the operation page of the device in Chow! App
Tap the Wi-Fi icon to change to another Wi-Fi network
P
button for 5 seconds and release it. The Green LED will blink once.
Tap the (Device information) in the setting page
R
button .
18
34100-206-04-A
Werbung
Inhaltsverzeichnis
