Inhaltsverzeichnis
Werbung
Connecting the ChowHUB to the Chow! App
For initial setup, check if the blue indication light is flashing
IF not, please follow below procedures to reset the device.
1. Press the
2. Press the
1. Connect the smartphone to your home Wi-Fi network before you start to setup the ChowHUB.
***ChowHUB is ONLY compatible with 2.4GHz Wi-Fi network!***
***ChowHUB will be connected to the Wi-Fi network you choose.***
2. Log in or sign up for Chow!APP.
3. Tap the (+) icon to add the device.
4. Tap the (ChowHUB) icon.
5. Enter the password for the Wi-Fi. DO make sure entering the correct password.
6. Tap on the ChowHUB icon on the (Find) device page
Set a PIN code for safety use. Once the PIN code is confirmed, the ChowHUB will appear on the
main page for further operation.
** The PIN code is required for other users to access to the ChowHUB.***
** The PIN code can be reset by pressing (P) and (R) button in
the ChowHUB to default to the factory setting.***
Make a successful ChowHUB setup with your home Wi-Fi
Suggest to bring the ChowHUB device close to the home Wi-Fi router as near as possible to
receive the best Wi-Fi strength to make a successful connection, and make sure the home Wi-Fi
source is 2. 4 G from the router not 5G, also must enter the correct password for the home Wi-Fi to
complete the setup
After the ChowHUB has been successfully connect to your home Wi-Fi, you may connect the
output to your automation system to start to operation.
9
P
button for 5 seconds
R
button once
R
P
Werbung
Inhaltsverzeichnis
