Inhaltsverzeichnis
Werbung
Setting of Chow!APP cycle mode
1. Fill in the name of the device
2. Select the (cycle mode)
3. Select (wireless door sensor).
*** For the connection of wireless limit switch, please refer to
Page 11 Wireless door sensor.***
4. Select the corresponds door output (Door1 = Output 1)
enter the door name
choose the door type ( different icon)
Garage door / Swing Gate / Sliding Gate
5. Lets get started !
Setting of Chow!APP open/stop/close mode
1. Fill in the name of the device
2. Select the (open/stop/close mode)
3. Select (wireless door sensor).
****For the connection of wireless door sensor, please refer to
Page 11 Wireless door sensor.***
4. Enter the door name
choose the door type ( different icon)
garage door / swing gate / sliding gate
5. Lets get started !
6. Select DC mode as the standard setting
7. Make the correct connection according to the diagram
Start to use
2
3
2
3
1
4
5
1
4
5
10
Werbung
Inhaltsverzeichnis
