Pallas Condor Mini Bedienungsanleitung Seite 9

• The Pallas Condor softener keeps
track of the water consumption
via an integrated water meter.
The amount of water that can
be softened depends on the
water hardness of the incoming
water and is programmed when
commissioning the system.
• When the resin bed of one
vessel is exhausted, the Pallas
Condor softener will perform a
regeneration. You will still have
softened water as the second
vessel is now in service.
• One tank is always in use, while
the other one is in regeneration or
stand-by.
• The Pallas Condor softener
disposes of a backlit LCD display
where the functioning of the
softener can be monitored and
parameters can be set or changed.
• Most of the parameters of the
Pallas Condor softener are
preprogrammed in the factory
so that only a few user-specific
parameters have to be set when
commissioning the unit.
• Parameters are stored in memory
EEPROM and will not be lost due to
power outage.
• The Pallas Condor softener allows
to configure the outgoing hardness
by turning the mixing screw.
• The Pallas Condor softener allows
to trigger a manual regeneration for
special cases where this could be
needed.
Manual Pallas Condor 9