Maintenance And Service; Maintenance And Cleaning - Bosch GOF 2000 CE Professional Originalbetriebsanleitung

All manuals and user guides at all-guides.com
OBJ_BUCH-622-001.book Page 27 Tuesday, January 15, 2008 5:10 PM
– Push the release lever 16 down and slowly
lower the plunge router until the adjusted
depth-of-cut is reached. Let go of the release
lever 16 again to lock this cutting depth.
– Guide the switched on power tool with the
protruding guide bushing alongside the tem-
plate applying lateral pressure.
Operation with Router Table (Accessory)
The GOF 2000 CE is compatible with several
router tables available on the accessories
market. To ensure safe mounting and usage
as intended for the GOF 2000 CE with a rout-
er table, it is absolutely necessary that you:
– make sure that the selected router table
is compatible with the GOF 2000 CE
(please observe the information of the
router table manufacturer)
– follow the mounting and operating in-
structions of the router table manufactur-
er
– follow the safety warnings of the router
table manufacturer and all safety warn-
ings of the GOF 2000 CE in these operat-
ing instructions.
Bosch shall not assume any liability whatso-
ever for injuries and damage that can occur
caused by use of the GOF 2000 CE with a
router table other than intended for.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
In extreme working conditions, conductive
dust can accumulate in the interior of the
machine when working with metal. The pro-
tective insulation of the machine can be de-
graded. The use of a stationary extraction
system is recommended in such cases as
well as frequently blowing out the ventila-
tion slots and installing a residual current
device (RCD).
Bosch Power Tools
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it
must be disposed of safely.
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
2 610 956 206 | (15.1.08)
English | 27