Marmitek Connect AD12 Bedienungsanleitung Seite 3

At all times, avoid bending the optical (Toslink) cable as it is
•
very delicate.
1. Connect the Audio Source to the analog input[1] on the
Connect AD12™ using the RCA audio cable.
2. Connect the Audio Amplifier to the digital audio output [2]
on the Connect AD12™ using a Coaxial or Optical audio
cable.
3. Connect the power adapter [3] and plug into the electrical
socket.
4. Set the switch [4] in the ON position and check that the
audio connection works.
Audio Source [1]
[3] [4]
[2] *Audio amplifier, soundbar or
active speakers