Husqvarna DC 6000 Bedienungsanweisung Seite 89

4. Remove the hose from the filter container.
5. Open the 3 snap locks on the cyclone container.
6. Lift the lid on the cyclone container.
7. Make sure that the cyclone is not clogged.
1883 - 001 - 01.06.2022
8. Remove the cyclone screw.
9. Use compressed air or a brush to clean the cyclone
screw and the cyclone container.
10. Install in the opposite sequence.
To clean the filter
1. Remove the 2 knobs and the handle.
2. Remove the hose from the filter container.
89