Assembly; Operation; Before Use - Husqvarna DC 6000 Bedienungsanweisung

Introduction
CAUTION:
with correct rated value for this product. Only
connect to an outlet that is correct grounded.

Before use

WARNING:
extractor make sure that the power and
voltage corresponds with the voltage shown
on the machines rating plate, including
extension cords.
WARNING:
grounded outlet only. Refer to
safety on page 80
To start the product
1. Remove the frame pin and raise dte product. Refer
Product overview DC 6000 on page 77 .
to
2. Install the dust bags. Refer to
Longopac dust bag on page 93 .
82

Assembly

Only use extension cable

Operation

Before using the dust
Connect to a properly
Electrical
To install a new
CAUTION:
before change of bag collection system.
3. Install the vacuum hose. Refer to
DC 6000 on page 77 .
4. Connect the product to the grinder.
Always clean the prefilter
Product overview
1883 - 001 - 01.06.2022