Commissioning And Operation - Klarstein LARMA Bedienungsanleitung

COMMISSIONING AND OPERATION

Note: Before using the unit for the first time, clean it with a soft, damp cloth
and then dry it thoroughly. Do not immerse the hoover in water or other
liquids.
Assembly
1. Attaching the battery to the appliance
Slide the battery onto the main body of the hoover until it locks into the desired
position. To remove the battery, hold the appliance by the main housing and
press the release button at the same time. Pull the battery down from the main
body.
Insert the aluminium tube into the opening on the main housing until it clicks
into place. If you want to remove the aluminium tube, hold the appliance by
the main housing, press the aluminium tube release button and pull out the
aluminium tube.
2. Fasten aluminium tube
EN
23