Using The Hedge Trimmer Attachment - Fuxtec FX-MT152 Original Bedienungsanleitung

Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev18

Using the hedge trimmer attachment

Transport of the hedge trimmer
Warning!
Never carry or transport your device with the blades running
to avoid the risk of injury.
Always carry it in a horizontal position only. Grip the bar so
that the device is horizontally balanced. Keep the hot muffler
away from your body and the cutting attachment behind you.
Always switch off the engine and place the blade guard over
the blades before transporting the tool over long distances. When transporting the tool
in a vehicle, secure it appropriately to prevent it from tipping over, leaking fuel, and
damaging the device.
For devices with adjustable bar: Make sure it is in a secure position.
Warning!
Never operate your tool with only one hand. The resulting loss of control can lead to
severe or fatal injuries. Keep hands and feet away from the cutting tool to avoid the risk
of injury. Never touch a running cutting tool with any part of your body.
Warning!
Do not bend forward too far. Always maintain your balance and a secure footing. Special
care is required when there is a danger of slipping (wet ground, snow) and challenging,
overgrown terrain. Watch out for hidden obstacles such as tree stumps, roots, and
puddles to avoid tripping. Remove fallen branches, undergrowth, and cuttings. Be
extremely careful when working on sloping or uneven ground. Never work on a ladder,
tree branch, or another unsafe surface. Never lift the tool above shoulder height.
Warning!
The tool blades continue to run for a short time after the throttle lever is released
(flywheel effect). The acceleration of the engine while the blades are blocked causes the
clutch to slip further. This can lead to overheating and damage to essential components
(including clutch, polymer housing component). This, in turn, can lead to a risk of injury
due to running blades despite idling adjustment.
For devices with adjustable bar: Carefully place the bar in the desired working position.
Do not touch the blades to avoid injury. Only make adjustments when the blades are
71