Mounting The Motor Scythe/Grass Trimmer - Fuxtec FX-MT152 Original Bedienungsanleitung

Original Bedienungsanleitung FUXTEC FX-MT152/-MT152E/-MT252_de_en_fr_ita_rev18

Mounting the motor scythe/grass trimmer

A metal blade with 3 teeth is delivered with the device. It is used for cutting bushes and
weeds. The use of the saw blade with this device is prohibited.
WARNING
Do not cut with blunt, cracked or damaged metal sheets.
Before working, check the surface for obstacles such as stones, metal bars or
other objects. If they cannot be removed,
mark this position to avoid collision with
the blade. Lines can become entangled on the blade head and flap or be swirled in
the air.
WARNING
Always use the shoulder strap. Adjust and fix the belt and
belt clamping plate on the device so that the device hangs a few cm above
the ground. The cut-out head and the protective shield should be aligned
horizontally in all directions. Pre-tension the machines on the right side of your
body.
WARNING
Do not use the brushcutter for cutting out trees.
WARNING
Also, wear head, eye, face and hearing protection, and safety shoes. Do not wear
rings and jewelry or
loose, dangling clothes that could get caught in the device.
Do not wear footwear with unprotected toes and do not work
barefoot or without leg protection. In certain situations, you must
wear head protection.
DANGER
DANGER
DANGER
DANGER
68