For Direct Plug-In Operation; On/Off Switch - BaByliss PRO 4rtists LO-PROFX FX726E Bedienungsanleitung

ENGLISH
Please carefully read the safety
instructions before using the
appliance.
LO-PRO TRIMMER
FX726E
adaptateur
Vibrations
LpA (dB(A))
LO-PRO TRIMMER
1. Before using the trimmer for the
first time, charge continuously for
3 hours. Maximum battery capa-
city will only be reached after 3
charging and discharging cycles.
2. Make sure the switch on the trim-
mer is in the «0» (OFF) position.
Connect the charging jack into
the receptacle on the bottom
of the trimmer. Plug the adap-
ter into an electrical outlet. The
charging indicator will light up
and blink to indicate that the
charging has begun. Charging is
complete after 3 hours. User will
see LED light has stopped blin-
king and is now solid.
3. The adapter may become warm
while charging. This is normal.
4. Preserving the battery: in order
to maintain the optimum capa-
city of the rechargeable battery,
the trimmer should be recharged
for 3 hours approximately every 6
months.
5. Make sure the switch is in the «0»
(0FF) position when the trimmer
CA78M
< 2,5 m/s²
< 70
is not operating.
6. Remove hair trimmings and de-
bris from the blades using the
provided cleaning brush. Wipe
the housing clean with a dry
cloth.
7. Apply a few drops of lubricating
oil to the blades and wipe off any
excess oil with a dry cloth. This
last procedure is important for
the proper maintenance of the
blades.
8. If the charging light starts to flash
rapidly (more than 4 flashes per
second), the appliance is faulty.
If this happens, stop charging
and remove the adapter from the
outlet and contact an authorized
service center.
FOR DIRECT PLUG-IN
OPERATION
Make sure trimmer is off. Connect
charging jack into the receptacle
at the end of trimmer and plug the
adapter into power outlet.

ON/OFF SWITCH

To operate, simply slide switch to
«I» position. To stop operation, set
to the «0» position.
VERY IMPORTANT:
MUST BE CLEANED AND OILED
ON A REGULAR BASIS FOR
PROPER FUNCTIONING. FAILU-
RE TO REGULARLY CLEAN AND
OIL THE BLADES WILL VOID THE
WARRANTY.
REPLACING (REMOVING) BLADE
SET
To remove the blade set, turn
the trimmer to the OFF position
and unplug it from the electrical
7
BLADES