Mode Switch; Manufacturer Address - Acer PORSCHE DESIGN RS Kurzanleitung

Mode switch

Press the Bluetooth button for 2 seconds to toggle your mouse between Wireless and
Bluetooth mode. LED flashes blue for 3 seconds indicating that the mouse is in Bluetooth
mode. LED flashes red for 3 seconds indicating mouse is in Wireless mode.
DPI switch
You can cycle through the DPI options by repeatedly pressing Bluetooth button for 1 second.
There are three available options for selection: 800/1600/3200.
Low battery notification
When the battery level is low, the flashing red will stay on if the mouse is in use. After stopping
using the mouse, the LED flashes red for 10 seconds and then off.
NOTE
The mouse will maintain a low current consumption when entering Sleep mode. It is recommended to
remove batteries if the mouse will not be used for an extended period.
Specifications
• Model: AMR030
• Operation System: Windows® 7 or later
(Windows® 8 or later / Mac OS X or later
are required for BT feature)
• Bluetooth: 5.0 or later
• Connection Type: RF & BT
Caution
• Do not disassemble the device or operate the device under abnormal conditions.
• Do not submerge the device in water.
• If the device could not be functional, or there was thermal abnormal situation, please re-plug
in the USB.
• If you still encounter problems after going through the corrective measures, please contact
your dealer or an authorized service center for assistance.
• For more information, please visit our website at www.acer.com.
Environment
Temperature:
• Operating: 5 °C to 40 °C
• Non-operating: -10 °C to 70 °C

Manufacturer address

Acer Inc.
8F, 88, Sec. 1, Xintai 5th Rd. Xizhi, New Taipei City 221, Taiwan
NOTE
All images and information in this document are for reference only and are subject to change without
notice. For the latest specification, please visit our official website: www.acer.com.
• Interface: USB Type-A port (Dongle)
• DPI: 800/1600/3200
• Weight: 92g ± 5g (with AAA battery x2)
• Dimensions (L x W x H):
114.3 x 60 x 27.36 mm
Humidity (non-condensing):
• Operating: 10% to 60%
• Non-operating: 10% to 60%
2