HeroCamper K2400 Installationsanleitung Seite 22

• THE REMOTE CONTROL WILL ONLY OPERATE IF DIRECTLY POINTED AT THE
PLENUM. It will beep once when the signal is received. Adjust the distance and
angle if the plenum does not respond.
• The unit will blow cold air in COOL mode and hot air in HEAT mode.
• When the unit is on, press the "DISPLAY" key on the remote control to display
on the plenum.
• The air-conditioner features power cut memory and automatic resets after
restarting.
• Low temperature heating will cause frosting, during which it is normal to show
"DF" on the plenum.
• When the outside temperature is lower than 0 degrees, the heating effect is
reduced. Adopt alternative methods of heating.
• If the device is to be left unused for an extended period, remove the batteries
from the remote control.
#HeroCamper™ – Lammefjordsvej 5 – 6715 Esbjerg N – Denmark
Phone +45 7022 5840 – sales@herocamper.com
www.herocamper.com
VAT No DK -40193189
Page 22 of 92