Tommee Tippee made for me Bedienungsanleitung Seite 7

How to use the self sterilising lid
1. Wash your pump in soapy
water, rinse throughly with
clean water.
1
2. Fill the pump with 30ml
of water.
2
3. Place the lid onto the
pump, ensure you have the
lid on the correct way by
lining up the triangles on the
lid and pump.
3
4
4. Place your pump with
the lid attached into the
microwave. Microwave for
4 minutes (750-1000 W).
4
5. Always allow to cool
for at least 2 minutes
before removing from the
microwave. The pump will
contain hot water and steam.
To avoid risk of scalding and
burns take extra care when
handling.
6. The pump will stay sterile
for up to 24 hours if you
remove the water and keep
the lid on.