Vitek VT-3539 Die Betriebsanweisung Seite 8

ENGLISH
Note: The minimum and maximum temperature data is erased daily (at midnight).
Hi and Lo symbols on the display
The Hi and Lo symbols appear on the display if the temperature or humidity level is
without the measurement boundaries of the device.
Indoor/ Outdoor
Temperature trend indicator
The temperature trend indicator shows the temperature trend registered by a separate
sensor over the past half-hour.
Pointer
TEMPERATURE CONDITIONS REPORT
Temperature conditions reporting symbols
The receiver's display will show the following symbols, representing the weather condi-
tions (they are chosen based on the temperature and humidity data received from the
remote sensor (channel 1)):
Weather
conditions
indicator
Black ice warning
• Displayed as a blinking snow symbol.
• Is displayed when the temperature on channel one is between -1.9°C and +2.9°C.
• Snow hardens and changes into ice when the temperature on channel 1 becomes
less that -1.9 °C. This is the freezing temperature.
• Cloudy weather will be indicated when the device is first connected..
• The sensor on channel 1 is used for weather information.
• If there is no sensor connected to channel 1, cloudy weather will always be indi-
cated
35391.indd 8 35391.indd 8
All manuals and user guides at all-guides.com
Indoor
Indoor
Outdoor
Outdoor
Trend
Sunny
Temperature Humidity
> + 55°C
< - 20°C
> + 70°C
< - 30°C
Rising Stable
Cloudy Rain
8
Reading on LCD
-
- Lo
> 95%
< 15% Lo
Falling
Snow
Hi
Hi
Black Ice
23.05.2006 17:08:52 23.05.2006 17:08:52