insta360 ONE RS Schnellstartanleitung Seite 7

❸ Install the Mounting Bracket on the ONE RS before capturing.
It will reinforce connections between the assembled camera mods, giving
added protection and ensuring waterproofing. Please read the "Waterproofing:
What to Know" manual for more waterproofing precautions.
①
Open the Mounting Bracket
To open the frame, press the
two red unlocking buttons at the
bottom of the Mounting Bracket
at the same time.
③
Close the Mounting Bracket
Push the open side of the frame
down until its connecting points
click in place.
Buttons should be aligned
correctly
②
Insert ONE RS into the
Mounting Bracket
④
Installed successfully
5