Xylem WTW Cond 3110 Schnellstartanleitung Seite 5

Cond 3110
AR
Status display
indicators
ARng
Cal
LoBat
nLF
TP
Tref20
TRef25
TIME
Socket field
connections
1
2
Initial
commissioning
Caution
Follow the safety instructions of the used sensors.
The operating manuals of the sensors are available on the supplied CD and on
the Internet under www.WTW.com.
ba75783y03 05/2017
All manuals and user guides at all-guides.com
Stability control (AutoRead) is active
Automatic range switchover; meter measures with
highest possible resolution
Calibration
With battery operation: Batteries almost empty
Nonlinear temperature compensation
Temperature measurement active
Reference temperature of 20 °C
Reference temperature of 25 °C
Setting of calibration interval
1
2
Conductivity measuring cell
Service interface
Insert the supplied batteries.
1
When doing so make sure that the poles of the batteries are
positioned correctly.
Switch on the meter with the <On/Off> key.
2
EN
English
5