Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
ENGLISH
Danger!
When using the equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read the
complete operating instructions and safety regulations
with due care.
Keep this manual in a safe place, so that the information
is available at all times. If you give the equipment to any
other person, hand over these operating instructions and
safety regulations as well. We cannot accept any liability
for damage or accidents which arise due to a failure to
follow these instructions and the safety instructions.
SAFETY REGULATIONS
Danger! Read all safety regulations and instruc-
tions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fi re and/or
serious injury. Keep all safety regulations and instruc-
tions in a safe place for future use.
LAYOUT SUPPLIED
1. Claw stop
2. Front hand guard
3. Front handle
4. Rear handle
5. Safety lock-off
6. ON/OFF switch
7. Oil tank cover
8. Chain wheel cover
9. Fixing screw for the chain wheel cover
10. Chain tensioning screw
11. Chain oil fi ll level indicator
12. Battery (in the case of Art. No.: 4501761 it is
not included in delivery)
13. Pushlock button
14. Rear hand guard
15. Cutter bar
16. Saw chain
17. Cutter guard
18. Charger (in the case of Art. No.: 4501761 it is
not included in delivery)
19. Adapter plate
PROPER USE
The chainsaw is intended for felling trees and for cutting
trunks, branches, wooden beams, boards etc. and can be
used for cross cuts and longitudinal cuts. It is not suit-
able for cutting any materials other than wood.
The equipment is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of misuse. The
user / operator and not the manufacturer will be liable
for any damage or injuries of any kind caused as a result
of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in com-
mercial, trade or industrial businesses or for equivalent
purposes.
TECHNICAL DATA
Akku Voltage, V (DC) ........................................................18
Chain speed, m/min .........................................................5.6
Battery Capacity, mAh ................................................ 4000
Battery Type ............................................................... Li-Ion
Bar length, mm ................................................................305
SOUND AND VIBRATION
Sound and vibration values were measured in accordance
with EN 60745-1 and EN 60745-2-13.
L
sound pressure level ..................................85,7 dB(A)
pA
K
uncertainty ............................................................... 3 dB
pA
L
sound power level ......................................95,4 dB(A)
WA
K
uncertainty ........................................................ 2,47 dB
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing. Total
vibration values (vector sum of three directions) deter-
mined in accordance with EN 60745-1 and EN 60745-2-13.
Handle under load
Vibration emission value front handle a
Vibration emission value rear handle a
K uncertainty = 1.5 m/s
2
The specified vibration value was established in accor-
dance with a standardized testing method. It may change
according to how the electric equipment is used and may
exceed the specified value in exceptional circumstances.
The specified vibration value can be used to compare the
equipment with other electric power tools.
The specified vibration value can be used for initial as-
sessment of a harmful effect.
Keep the noise emissions and
vibrations to a minimum
▶ Only use appliances which are in perfect working order.
▶ Service and clean the appliance regularly.
▶ Adapt your working style to suit the appliance.
▶ Do not overload the appliance.
▶ Have the appliance serviced whenever necessary.
Cordless chain saw | 15
= 4.88 m/s
2
h
= 4 m/s
2
h
Werbung
Inhaltsverzeichnis
