Working With The G-St 6000+ G2; Overview - Geutebruck G-ST 6000+ G2 Installationsanleitung

G-ST 6000+G2

Working with the G-ST 6000+ G2

Overview

Working with
G-Set
After the G-ST has been started and successfully integrated into a network, you can
work with the device. The G-ST uses the following applications which can be opened
using the start bar or from the desktop using a double click:
G-Set is the G-ST setup client. In this Windows interface, you set the re-

cording parameters, modify and assign passwords and access rights and
add additional users for the system.
There are three integrated wizards, which help you to set up your system:
 Connection Wizard
Here you create, manage and verify connections to servers
(Password, Ping, Connection).
 Media Channel Wizard
You can see, report and manage all available cameras on the network
 Event / Alarm Wizard
Events and alarms are created and managed here.
G-Set can be started on the client side or directly on the server. If you have opened
G-Set on a workstation computer, in the program you must create and save a cor-
responding connection on the server.



18
Back to the
table of contents