Operation - DERMAVIT Diamond Shield IE Crystal Bedienungsanleitung

Operation

Charge condition of the battery
Activate / deactivate the loudspeaker
Keypad lock
All manuals and user guides at all-guides.com
Switch On: by pressing briefly the POWER button
Switch Off: by pressing the POWER button and holding it
for about 1 second
Automatic Switch Off: After 12 minutes without user or
program activity the device switches off automatically to
save battery power.
The LED indicates the battery charge level. If the device
is switched on, the LED flashes. When the battery is full,
the flashing frequency is slow. When the battery is almost
empty, the flashing frequency is faster.
The device is fully functional even if the battery is almost
empty.
If the battery is completely empty, a message appears, and
the device can no longer be used.
Press the SOUND button to switch the audio signal on or
off. The current state is then displayed briefly.
The device has a keypad lock to prevent accidental opera-
tion of buttons.
To activate or deactivate the keypad lock briefly press the
POWER-button and then press OK. The device will then
display the status of the keypad lock.
Diamond Shield IE Crystal
Instruction Manual
page 44