Device Start-Up; App Start-Up; Beurer Lightup" App; Bluetooth ® Loudspeaker - Beurer WL 90 Gebrauchsanweisung

Display
1 2
12 11
1 Radio mode
2 Month (M) / Day (D)
3 Volume
4 Bluetooth ®
5 Clock mode
6 Time / Date /
Radio frequency

6. Device start-up

• Remove the packaging material.
• Check that all parts listed are present.
• Check the device, mains adapter and mains cable for
damage.
• Place the device on a irm, even surface.
• Insert the mains adapter connector into the mains
adapter socket on the rear of the device.
• Insert the mains adapter into a suitable socket.
• The time is shown on the device display.
• Route the cable antenna of the device to the rear.

7. App start-up

7.1 "Beurer LightUp" app

Once you have downloaded the "Beurer LightUp" app
and the wake up light is connected to a smartphone via
® , you can control all of the functions of the
Bluetooth
wake up light with ease via the smartphone app.
For your convenience, instead of using the buttons on the
device, we recommend that you control the functions of
the wake up light via the smartphone app.
3
2
10 8 7
9
7 Goodnight function
8 Radio mode
9 Beep
10 Wake-up melody
11 Alarm memory space 1-3
12 Setting active
To control the device's functions with the app on your
smartphone, proceed as follows:
1. Ensure that your smartphone is connected to the
Internet.
4
2. Activate Bluetooth
3. Download the "Beurer LightUp" app from the Apple App
5
Store (iOS) or Google Play (Android).
4. Open up the "Beurer LightUp" app and add the wake
6
up light.
5. You can now control all functions of the wake up light
via the app.
Note
The following functions can only be controlled via the
app:
® loudspeaker
• Bluetooth
• Choice of 10 deined mood light settings
• Direct choice of mood light colour
• Alarm can be switched on/of for each day
• Adjustment of special alarm settings
• Button tone can be switched on/of
• Activation of sunset function
7.2 Bluetooth
To activate the Bluetooth
must be established at least once as follows:
1. Close the "Beurer LightUp" app if it is open.
2. Press the MODE / ENTER button twice until "b t " is
displayed. This begins the Bluetooth
3. In the Bluetooth
(iOS/Android settings), select "WL 90 Speaker" from
the device list in order to connect to this.
4. Once the wake up light is connected to the smartphone,
the blue Bluetooth
5. Select the music function in the menu of the LightUp app.
6. Press the MODE / ENTER button twice to deactivate
the loudspeaker. Close the app for this.
Note
The connection is saved for this combination of
smartphone and wake up light device. The Bluetooth
connection is then established automatically when you
start the music function in the LightUp app. This automatic
function may vary depending on the smartphone model.
Note
® Smart (low energy) is generally used, for
Bluetooth
example to control the light and alarm functions. For the
music playback, Classic Bluetooth
here that the Bluetooth
of the wake up light (Bluetooth
searching for connection).
12
® on your smartphone.
®
loudspeaker
®
loudspeaker, a connection
®
® settings of your operating system
®
logo will appear on the display.
® is also used. It is only
®
symbol appears in the display
®
connection is active or
search.
®