PICO Neo 3 Link Schnellanleitung Seite 3

❶ Install Batteries
Pull the tab to remove the insulating paper by following the picture.
EN
*Note: The 1.5V AA alkaline batteries are recommended to use.
03
Quick Guide
Slide the battery cover according to arrow direction with your palm.
❷ Power on the Controller
First Start: The Controller will start automatically after removing the
insulating paper.
Others: Short press the HOME button for 1 second until the status
indicator flashes blue.
❸ Power on the VR Headset
Long press the POWER button for 2 seconds until the status indicator
turns blue.
EN
04