Frost-Free Storage - Philips HD7825 Benutzerhandbuch

, When all the water in the water reservoir has
been used up, the descaling cycle is finished. The
light ring around the on/off button starts to flash
rapidly.
7 Repeat the descaling procedure (steps 1 to 6)
once. Replace the used pod with another used
pod to filter out the scale residue.
8 Rinse the water reservoir with tap water. Fill
the water reservoir up to the MAX indication
with tap water and repeat steps 3 to 6.
Note: Do not refill the water reservoir with used hot
water or the used descaling mixture.
9 Fill the water reservoir with fresh tap water up
to the MAX indication again and repeat steps 3
to 6 once more.
Note: Always rinse the machine by letting it empty two
full water reservoirs.
10 Remove the used pod and clean the pod
holder after descaling to prevent the sieve in
the centre from getting clogged.

Frost-free storage

After you have flushed the machine for the first
time (see chapter 'Before first use'), it may only
be used and stored in a frost-free place to
prevent damage.
replacement
You can order all removable parts from your Philips
dealer or a Philips service centre. You can also order
them online at www.support.philips.com.
EnglisH
21 21