nania RANGER SL Gr.0+ Bedienungsanleitung Seite 28

Installation with Isofix and support leg
Shake
Find the ISOFIX connectors. Shake the seat to check the
Fix the guide on both sides installation. If it feels loose,
re-install from the beginning.
Push the ISOFIX connectors
into car anchor points until
you hear two 'clicks'.
If the indicator reads green,
the installation is ok. If it
reads red, push down until
it shows green.
ATTENTION:
Push
Make sure all the three points are installed
correctly and securely.
Push back the seat firmly
against the vehicle seat.
EN
28
1 6
ISO FIX
3
8
5
Press the adjuster buttons. Put down the support leg so it
Push the retractors to the touches the car floor.
longest points.
The seat is installed well when
the button shows green.
Install again if it shows red.
2 7
4