Ca-Mi O2-easy Handbuch Seite 22

EN
TROUBLESHOOTING
Problem Possible causes
The pulse 1 The batteries might be at or
oximeter not tted.
does not 2 The batteries might be
turn on incorrectly tted.
3 The pulse oximeter might be
damaged.
The warning 1 The device is programmed to
lights
automatically turn o when it
unexpecte- does not receive a signal for
dly go o more than 8 seconds.
2 The batteries are low.
"Error7" 1 Batteries low.
appears on 2 The emission tube is damaged.
the display 3 The control circuit is
malfunctioning.
Solutions
1 Replace the batteries.
2 Remove and re t the
batteries.
3 Contact your local
Customer Service.
1 No problem, this
condition is normal.
2 Replace the batteries.
1 Replace the batteries.
2 Contact your local
Customer Service.
3 Contact your local
Customer Service.
41
SYMBOLS
Type BF applied part
Attention
Oxygen saturation
Pulse rate (BPM)
Low power indication
Serial No.
No SpO2 alarm
Power switch
Mark of compliance to the MDD 93/42 EEC
Follow instruction for use
Manufacturer: CA-MI Srl – Via Ugo La Malfa 13
Frazione Pilastro – 43013 Langhirano (PR) Italy
Storage relative humidity
Storage temperature
42
EN