Ca-Mi O2-easy Handbuch Seite 19

EN
Pulse bar
graph
There are two display modes:
After turning on the pulse oximeter, each time
you press the power switch, the pulse oximeter
will switch to another display modes.
The bar graph displays the pulse measured on
the patient's wrist. The height of the bar graph
shows the pulse resistance in the patient's wrist.
Power button
Battery warning light
Oxygen saturation
Pulse frequency
35
DEVICE ACCESSORIES
1 Cord
2 Two AAA batteries
3 Instruction manual
CORD INSTALLATION
A Slip the thin part of the cord
through the eyelet.
B Position the end into place before
pulling.
36
EN