Voice Commands; Headset Charging; Need Help - T'nB CBHOME Bedienungsanleitung

EN

VOICE COMMANDS

If your phone operates on voice command, when the headset is on standby
press Play twice, after the beep you can give your instructions. Make sure your
phone works with voice control. Be careful, some phone models may work
differently. Refer to the instructions on your phone.

HEADSET CHARGING

Insert the USB cable into the USB port, which supports a 5V voltage. Your
headset will be fully charged after 3 hours. The battery is rechargeable. It is
recommended to fully charge the battery when you first use it.
* Do not take a call when the low battery indicator is on, as this means that
the headset is about to turn off.
*When the device is charging, the indicator lights up red.

NEED HELP ?

We are committed to providing high customer satisfaction and we would be
pleased to hear from you at info@t-nb. com. For servicing, troubleshooting and
other information on this product, please visit our website: www.t-nb.com.