Front Panel - Royal Catering Rcps-1350 Bedienungsanleitung

EN
SYMBOLS
The operation manual must be reviewed.
Never dispose of electrical equipment together
with household waste.
This machine conforms to the CE declarations.
Attention! Hot surface may cause burns.
For indoor use only.
PLEASE NOTE! Drawings in this manual are
for illustration purposes only and in some details
it may differ from the actual machine. The original
operation manual is in German. Other language
versions are translations from German.
USER MANUAL
I. SAFETY INSTRUCTIONS
General safety information for the use of electrical devices:
To avoid injury from fire or electric shock, please ensure
compliance with safety instructions when using this device.
Please read the instructions carefully and make sure that
you have understood them well. Keep the manual near the
equipment to be able to read it at any time. Always use
current sources connected to the ground and providing
the necessary voltage (indicated on the label on the device).
If you have any doubt, let an electrician check that your
outlet is properly grounded. Never use a damaged power
cable. Do not open the unit in a damp or wet environment,
or if your hands or body are damp or wet. Protect the unit
from solar radiation. Use the device in a protected location
to avoid damaging the equipment or endangering others.
Make sure the device is able to cool and avoid placing it too
close to other devices that produce heat. Before cleaning,
disconnect it from the power source. Use a soft damp
cloth for cleaning. Avoid using detergents and make sure
that no liquid enters the unit. No internal element of this
device needs to be maintained by the user. Opening the
device without our approval leads to a loss of warranty!
II. SAFETY GUIDELINES
1. Please read these instructions carefully and
understand them before operating the device!
Please observe the safety guidelines carefully in
order to prevent damages through improper use!
2. Please keep this manual available for future
reference. If this device is passed on to third parties,
the manual must be passed on with it.
3. Only use this device indoors and for its intended
use.
4. We do not offer any warranty for damages resulting
from improper use or incorrect operation.
6
U S E R M A N U A L
5. Check before first use whether main voltage type
and current comply with the indicated data on the
type plate.
6. This device is not intended to be used by persons
(including children) with limited physical, sensory
or mental aptitude or lack of experience and/or
knowledge unless they are supervised by a person
responsible for their safety or have received
instruction from this person as to how the device
is used.
7. ELECTRICAL SHOCK HAZARD! Do not attempt
to repair the unit yourself. In case of device failures,
repair must be done by qualified experts.
8. Please check main plug and power cable regularly.
If the power cable for this device is damaged, it has
to be replaced by the manufacturer or its customer
service or another qualified person in order to
prevent hazards.
9. Prevent damages to the power cable by avoiding
squeezing, bending or rubbing it on sharp edges and
keep it away from hot surfaces and open flames.
10. ATTENTION! DANGER TO LIFE! While cleaning,
never immerse the device in water or other liquids.
11. Under no circumstances open the housing.
III. TECHNICAL DETAILS
Product name Popcorn Maker
Model RCPS-1350
Voltage [V] 230~
Frequency [Hz] 50
Power [W] 1350
Temperature [°C] 210 – 230
Amount of oil [ml/once]* 50
Amount of sugar 50
[g/once]*
Amount of corn 150
[g/once]*
* The above-mentioned proportions are approximate and
can be adapted according to the customer's choice and
needs.
IV. BEFORE FIRST USE
Upon receipt of the goods, check the packaging for
integrity and open it. If the packaging is damaged, please
contact your transport company and distributor within
3 days and document the damages in as much detail as
possible.
Rev. 21.02.2022
Do not turn the package upside down! When transporting
the package, please ensure that it is kept horizontal and
stable. Please keep all packaging materials (cardboard,
plastic tapes and Styrofoam) so that in case of a problem,
the device can be sent back to the service centre as well
-protected as possible.
ATTENTION! Despite the safe design of the
device and its protective features, and despite
the use of additional elements protecting the
operator, there is still a slight risk of accident or
injury when using the device. Stay alert and use
common sense when using the device.
V. DISPOSAL OF THE PACKAGING
Please keep all packaging materials (cardboard, plastic tapes
and Styrofoam), so that in case of a problem, the device can
be sent back to the service centre in accurate condition!
VI. SAFETY INSTRUCTIONS
1. The popcorn machine should be placed where it
has a strong and stable position (a 3% slant is an
advantage).
2. The device should only be connected with an
appropriate power source.
3. The safety switch / power switch should be located
near the machine. The path must be freely accessible.
4. All electrical connections have to be carried out by
authorized personnel only.
VII. CONSTRUCTION OF THE DEVICE
1. control panel
2. housing
1
3. handle
7
2
4. pot
3
8 5. lid
6. pot connection
9 4
7. light
5
10
6 8. annealed glass
11
9. door
10. lower door
11. draw

FRONT PANEL

1 2 3
1. STIRRER – turning on the stir function
2. HEAT – turning on the bowl heating
3. WARMING & LIGHT – turning on the interior light
and heating
Rev. 21.02.2022
EN
VIII. OPERATION
1. Set the WARMING&LIGHT (3) switch to ON
position.
2. Set the EAT (2) switch to ON position, add oil, wait
for oil to heat up (3-4 minutes).
3. Then set the STIRRER switch to ON position, add
corn kernels (and sugar if required), cover with lid
– wait for all the kernels to pop. Remove from pot
suing the lever by the pot to tip out the popcorn.
4. Please note that during the production of popcorn,
the door needs to be closed so that the hot popcorn
cannot escape and cause burns.
5. You can repeat this procedure as often as you want
to. It only takes approximately 2 minutes until the
corn pops steadily.
6. Do not let any oil drop on the hot plate as it can
result in a fire. WARNING: Do not let any water
drip on the plate during the popcorn popping
procedure.
7. The device is equipped with a thermostat. If the
temperature exceeds the maximum the machine
switches off automatically to ensure the required
safety.
ATTENTION: The pot has to be emptied and the heating
turned off as soon as the frequency (approx. 2-3 seconds)
of popping slows down. Only like this, burning of sugar
and popcorn as well as damage to the coating can be
prevented. It is not always possible for all corn to pop.
Remove residues after every production cycle. We cannot
assume liability for damages to the pot's coating due to
improper use.
IX. CLEANING AND MAINTENANCE
1. Switch off the device and disconnect the power plug
in order to prevent accidents when cleaning the
machine.
2. To clean the device from the outside, use a wet cloth
with some corrosion protection. DO NOT clean the
machine with water as it can damage the electric
function of the device.
3. If the device is not used for a prolonged period of
time, unplug the power plug.
4. DO NOT clean the inside of the device with hard
metallic objects, as this will damage the coating of
the machine.
X. TRANSPORT UND LAGERUNG
During transport, the machine should be protected
from shaking, falling and turning upside down. Store it in
a properly ventilated place with dry air and without any
corrosive gas.
7