Safety Instructions; Technical Data - Anslut 019935 Bedienungsanleitung

SAFETY INSTRUCTIONS

• Read these instructions carefully before
installation and use, and save them for
future reference.
• The product is not dimmable.
• Disconnect the power supply before
installation.
• The product is only intended for indoor
use in dry areas. Damp areas and outdoor
environments require products with a
higher protection rating.
• Never modify the product or any of its
parts in any way – risk of personal injury
or material damage.
• The product is intended for lights with
2-pin IEC approved G13 standard sockets.
• The product must be installed by an
authorised electrician in accordance with
the relevant electrical safety regulations.
ELECTRICAL SAFETY
New installations and extensions to existing
systems should always be carried out by
an authorised electrician. If you have the
necessary experience and knowledge
(otherwise contact an electrician), you can
replace power switches and wall sockets,
fit plugs, extension cords and light sockets.
Incorrect installation can result in fatal injury
and the risk of fire.
SYMBOLS
Read the instructions.
The product is not dimmable.
Approved in accordance with
the relevant directives.
Recycle discarded product
in accordance with local
regulations.

TECHNICAL DATA

Rated voltage
Output
Socket
Tube type
Energy class
Colour temperature
Luminous flux
Power factor
Colour rendering index
Life span
On/Off
INSTALLATION
NEW INSTALLATION
FIG. 1
FIG. 2
AFTER INSTALLATION IN LIGHTS
WITH CHOCK COIL
CONVENTIONAL T8 strip light
S = Starter.
FIG. 3
LED strip light
Replace the starter with the LED fuse.
F = LED fuse.
FIG. 4
EN
230 V ~ 50 Hz
18 W
G13
T8
A++
4000 K
2160 lm
0.9
80
25000 h
12500 times
11