Establishing The Power Supply (Mains Operation) - Bresser BR-S200B Bedienungsanleitung

1 Handle
3 V-Lock battery socket (for suitable battery
mobile operation) (optional)
5 Fan switch
7 ON/OFF toggle switch (switch device on/off)
9 UP button (color temperature)
11 Locking knob (spigot/tripod connection)
13 CHANNEL button (enable/disable channel se-
lection)
15 LCD display
17 DMX OUT socket
19 Fork holder
21 Power cable with 2-pin DC plug and Euro plug
1
V-Lock battery not included
Scope of delivery:
LED Light (A), fork mount with tripod connection (B), power cable (C)
6 Establishing the power supply (mains
operation)
WARNING! The device cannot be operated by mains adapter and battery at the same time! To
avoid voltage damage, always operate with only one of the two possible voltage sources!
1. Insert the 2-pin DC plug of the power cable into the power connection socket on the device.
2. Insert the Euro plug of the power cable into the power socket (230V max. voltage).
CAUTION! When switching on the device, make sure that the ON/OFF toggle switch is moved to
the correct position for the desired voltage source (mains adapter or battery)!
3. Move the ON/OFF toggle switch to the 'II' position to operate the device from mains power and
switch on.
4. Move the ON/OFF toggle switch to the '0' position to turn off the device.
NOTICE! If the device is not used for a longer period of time, disconnect it from the power sup-
ply (pull out Euro plug or remove battery).
7 Power supply via battery (optional)
WARNING! The device can not be operated at the same time by mains power adapter and by
battery! To avoid voltage damage, always operate with only one of the two possible voltage
sources!
As an alternative to the power supply through mains voltage, the device can also be powered by a bat-
tery*.
NOTICE! Only use the type of battery described in this manual. Use of an unsuitable or unau-
thorized battery will damage the device and void the warranty.
1. Charge the rechargeable battery* completely.
2. Insert the battery into the battery socket at the backside of the housing.
CAUTION! Before switching on the device, make sure that only one voltage source is used
(power adapter or battery)!
2 LED panel
1
for 4 Fan
6 Power connection socket
8 Rotary control for brightness and channel se-
lection (stepless control)
10 DOWN button (colour temperature)
12 Spigot/tripod connection
14 DMX/2.4G button (enable/disable DMX or
2.4G connection)
16 Rotary control for colour temperature setting
(stepless control)
18 DMX IN socket
20 Locking knob (fork holder)
7 / 28