VonHaus 20V MAX Bedienungsanleitung Seite 5

PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE
Be aware of unintentional starting. Ensure
the switch is in the off position before
connecting to the power source and/
or battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on may result in
serious injury.
Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
Do not overreach. Keep proper footing
and balance at all times. This will enable
better control of the power tool in
unexpected situations.
If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection devices can
reduce dust-related hazards.
Store idle power tools out of reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the Pole Trimmer.
Power tools are dangerous in the hands
of untrained users.
POWER TOOL USE AND CARE.
Do not force the Cordless Pole Trimmer.
Use the correct power tool for your
application. The correct power tool will
do the job better and more safely at the
rate for which it was designed.
Do not operate continuously for periods
longer than those specified in the
instructions.
Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired
by a qualified electrical professional.
Disconnect the plug from the power
source and/or the battery pack from
WARNING
the power tool before making any
adjustments, changing accessories, or
storing. Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
Maintain your power tool. Check for
misalignment or binding of moving
parts, breakage of parts and any other
condition that may affect the power tool's
operation. If damaged, have the power
tool repaired by a qualified repair person
before use. Many accidents are caused by
poorly maintained power tools.
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and
tool bits etc. in accordance with these
instructions, taking into account the
working conditions and the work to be
performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Only use accessories supplied and/or
recommended by DOMU Brands.
BATTERY/CHARGER USE AND CARE.
Recharge only with the charger specified
by the manufacturer. A charger that is
suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
injury and fire.
An extension cord should not be used
unless absolutely necessary. Use of an
improper extension cord could result in
the risk of fire or electric shock.
The charger is not intended to be used
for any purpose other than charging
rechargeable batteries. Any other use
may result in risk of fire or electric shock.