Cleaning & Maintenance - VonHaus 20V MAX Bedienungsanleitung

CAUTION: Always hold the Pole Trimmer with both
hands when in use.
When using in the extended position always use the
AUXILIARY HANDLE (11) and SHOULDER STRAP
(10) for balance.
POWERING ON THE POLE TRIMMER
To start the Pole Trimmer press the SAFETY SWITCH
(6) forwards along with the POWER TRIGGER (7) .
NOTE: When the Pole Trimmer starts up there may
be some kickback, always ensure you are stood firmly
and have a firm grip.
Release the SAFETY SWITCH and keep the TRIGGER
SWITCH pressed.
CLEANING & MAINTENANCE
Before storing, always remove the Battery from the
tool and clean and lubricate the cutting blade.
Dry the Cutting Blades before storage to prevent
corrosion.
When transporting or storing the Pole Trimmer,
always fit the Blade Safety Cover (1).
Store the tool in a secure, dry place, out of reach of
children and animals.
Do not place other objects on top of the machine
when storing.
Storing the tool outside in a damp environment such
as a garden shed may cause certain components such
as the Blades to corrode.
OPERATION
POWERING OFF THE POLE TRIMMER
To power off the Pole Trimmer release the Power
Trigger (7)
Wait until the Blades come to a complete stop before
carrying out any maintenance or storing the tool.
BLADE BRAKE
The Pole Trimmer is fitted with an electric brake which
very quickly brings the blades to a stop as soon as
either of the Triggers are released.
This is an important safety feature that greatly
reduces the chance of injury to the operator if a
hand slips off the Front or Rear Handle and control
is temporarily lost. When the unit is switched off
and the motor brake operates, there may be some
sparking (or flashing) in the area of the upper motor
ventilation slots. This is normal and does not indicate
any problem with the tool.
1. Push
2. Squeeze
CAUTION: Do not use abrasive materials to clean the
product.
WARNING! Do not immerse any part of the tool in
water or any other liquid.
Clean the exterior of the machine thoroughly using a
soft brush and cloth.
WARNING! Do not use water or solvents.
Remove all debris, especially from the ventilation slots
on the motor housing.