Texas El-Tex 2000 Bedienungsanleitung Seite 9

Operation
Always start the engine from safety zone.
Do not leave the safety zone while operating the machine, if it is necessary to leave
the safety zone, turn off the engine before leaving the zone.
After striking a foreign object, stop the engine immediatel and inspect the machine
thoroughly for damage. Repair the damage before continuing
If the machine should start to vibrate abnormally, stop the engine and check
immediately for the cause. Vibration is generally a warning of damage.
Always disengage the levers, turn off the engine, when the unit is left unattended.
Always turn off the engine and ensure that all moving parts have come to a
complete stop before making any repairs, adjustments, or inspections.
Exercise extreme caution when operating on slopes.
Never operate the machine at a fast pace.
Do not overload machine capacity by attempting to work at too fast a rate.
Do not carry passengers.
Never allow any bystanders in front of unit.
Always disengage the blades, if not in use.
Only operate the machine at daylight or in fully illuminated areas
Ensure a stable foothold and always keep a firm hold on the handles. Always walk,
never run.
Do not operate the equiment when barefoot or wearing sandals.
Exercise extreme caution when changing direction on slopes
By rear tillers, ensure that the blades are protected by safety shield, only the part of
the blades that works into the soil must be free.
Never attempt to make any adjustments, while the engine is running.
Use extreme caution when reversing or pulling the machine backwards
Maintenance and storage
The engine shall be stopped when carrying out maintenance and cleaning
operations, when changing tools and when being transported by means other than
under its own power.
Check regularly that all bolts and nuts are tightened. Retighten if necessary.
The engine must be completely cooled before storing indoors or covered.
If the machine unused for a period of time, please refer to the instructions in this
manual.
Maintain or replace safety and instruction labels, as necessary.
Only use orginal spare parts or accessories. If not orginal parts or accessories is
used, the liablility is no longer applied.
Replace faulty silencers.