Crouzet SSR Installationsanleitung

CROUZET SOLID STATE RELAYS - PANEL MOUNT PRODUCTS have been developed to offer all the advantages of electronic switching technology. The low profile 12.5 mm
height industrial housing is quick to install. The product is compact and reliable. Please refer to the data sheet available on www.crouzet.com
GNZ
MOUNTING INSTRUCTIONS
ON HEATSINK
4
1
3
M4 x 12 mm / 1.2 Nm mini
1.
Select the adequate heatsink (see thermal curves on product datasheet).
2. Use thermal grease between the SSR and heatsink (0.06 mm of thickness).
3.
Two screws (Ø 4x12 mm are needed to mount the SSR on the heatsink.
4. For optimal thermal performance heatsink fins should be oriented vertically
to promote the perfect convection airflow.
MOUNTING ON PANEL
1. Before mounting the SSR, locate the panel
section. The surface must provide adequate
heat sinking capability - preferably aluminum,
uncoated, flat and clean.
2.
Recommended to use a thermal grease
between the SSR and the panel.
3.
SSR mounting slots have a diameter of 5 mm.
Please use two screws to mount on the panel.
4.
Be sure to tighten both screws until they
contact the baseplate before
applying full torque (1.2 Nm).
!
WARNING:
The user should protect heat sensitive materials as well as
people against any contact with the heatsink. For correct cooling, the SSR needs
air convection. Less air convection produces an abnormal heating. In the event
there is no space between two SSRs, reduce the load current. Forced cooling
(ex. fan inside the cabinet) significantly improves the thermal performance.
Heatsink temperature should never exceed 90 °C.
For more information please go to www.crouzet.com
SSR - PANEL MOUNT
Panel mount - AC Output Single Phase
• 8 A SSR for low-profile applications
• Fast-on terminals for easy installation
in applications that control resistive loads
and inductive loads
!
2
LOW PROFILE
• Zero Cross Turn-On and Instantaneous (Random)
• cRUus, CE and UKCA Recognized
PART NUMBER NOMENCLATURE
Channels Layout
8413 2
8413: Low
2:
GNZ
Single
Profile
Phase
WIRING DIAGRAMS
AC
GNZ
V
L
O
1 1
A
D
1/L1
3/A1(+) 4/A2(-)
RECOMMENDED ACCESSORIES
TYPE
Screws
Heatsink Mounting
Thermal Grease
Heatsink Mounting
WARNING
INSTALLATION SHEET
Switching Output Control
Type Current Voltage
1 1 0
Instantaneous 8A
1: 1: 0:
(Random)
2: Zero Cross
2/T1
1.
Protection Equipment
DESCRIPTION
Screw Mounting Kit
Thermal Grease
C.MC.DEF.00886.EN
Generation
N
4-32 V New
c N:
P/N
26532001
26532003