Utility Description; How To Use Bt - auna Linie 200A Bedienungsanleitung

EN
26

UTILITY DESCRIPTION:

1. Connect the one end of the right tower cable to the right output port on
the back panel of the left tower.
2. Make sure all the cables above are connected correctly, then connect the
power cord to AC power.
3. Switch on the power, the red LED display shows (-----). then press power
button either on the remote or left speaker front panel.

HOW TO USE BT

1. Select the audio input to BT mode
2. Search BT device with name "Linie 220A"
3. Connect the BT.
4. If your BT device below 2.0 version, input password "0000" when
connecting.