Herunterladen Inhalt Inhalt Diese Seite drucken

Inventum GF432-GF442 Gebrauchsanweisung Seite 11

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ensure that the parts are dried thoroughly after cleaning.
Clean the exterior of the fryer with a damp cloth and when
needed a mild detergent.
Never use any abrasives! Never immerse the power cord
or plug in water or other liquids.
to clean the reservoir you can also use the AQUA CLEAN
program. select the AQUA CLEAN program with the
SELECT button.
this menu is used to clean the inside of the fryer and the
actual heating element.
fill the bowl with hot water just above the MAX indication
and add a cleaning agent. the temperature of this menu is
fixed at 100°C for a time of 30 minutes.
When this menu is selected the user can use the START/
STop button to start the countdown timer at once.
Preheat is not needed.
if the stArt/stOP button is pressed when the counter is
counting down the time will stop.
oIL CHANGE
the fryer is equipped with an oil indicator indicating
the number of frying times which can be considered as
healthy. every time the fryer is plugged in the oil indicator
value will be decreased with 1 time.
When the oil indicator indicates oIL0 it indicates the last
frying time which can be considered as healthy. When the
oil indicator indicates oIL- it indicates to the user that the
oil should be renewed.
Because the number of frying times, which are considered
as healthy, depend on the type of frying oil it is possible
for the user to manually set the number of healthy frying
times. the oil indicator can be set from 0 to 9 by the user
ONLy during startup of the fryer.
Before changing or filtering the oil, always unplug the
fryer and let it cool down completely.
the liquid frying oil can be used longer, if you filter it
regularly. replace the liquid frying oil regularly, after 8 to
12 times.
filter the liquid frying oil only when it is cold. Pour the oil
in a clean bowl. Clean the reservoir with hot water and a
mild detergent or in the dishwasher. thoroughly dry the
reservoir.
Pour the liquid frying oil back in the reservoir through a
fine sieve.
Check each time if the level of the liquid frying oil is
between the minimum and maximum level.
When replacing the oil, follow the same steps as described
before.
Liquid frying oil can be poured back in the bottles.
Never wash away fat or oil through the sink.
11

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis