Therabody TheraFace PRO Bedienungsanleitung Seite 17

For Microcurrent Treatment:
Stimulated site
Face and neck
Number of modes
3
Output Intensity Level 4
Indicator Light Yes , OLED display
Timer Range 5-8 minutes per day for 6 weeks
Housing Materials Console: PC plastic
OUTPUT SPECIFICATION
Waveform Pulsed Biphasic
Operating voltage 0-15.5V
Maximum power 24mW
Automatic shut-down Yes
210-280mV @500 Ohm
Maximum Output
0.8- 1.2V @ 2k Ohm
Voltage(+/- 10%)
4.75-5.2V @ 10k Ohm
420 μA - 560 μA @ 500 Ohm
Maximum Output Current 400 μA - 600 μA @ 2k Ohm
475 μA - 520 μA @ 10k Ohm
Pulse Width On 60ms / Off 60ms
Frequency 8.3Hz
Net Charge N/A - Battery operated
Maximum Current Density 1.65mA/cm^2 @ 500 Ohm
Maximum Power Density 1.36125mW/cm² @ 500Ω
FOR LED TREATMENT
Light wavelength
IR+Red:830nm±10nm/633 ± 10 nm
Blue light:415nm±10nm, Red light:633nm±10nm
Power of light
IR+Red 70±5%/60±5%
(mW/ /cm2)
Red light 60±5%, Blue light 45±5%
FOR PERCUSSIVE THERAPY
Percussive 1750, 2100 and 2400 rpm
Frequency 1750rpm :29.1Hz 2100rpm:35Hz 2400rpm:40Hz
EN
16