Operational availability is shown by continous glow of the green LED next to the smartcard
slot. During an action (reinitialization, PIN reset, PIN reset by PUK, initialization of a VPN
tunnel), the LED blinks and then glows continously.
6
Boot Menu and BIOS
✞
☎
Press
Del
during memory testing to enter the BIOS. Leave the BIOS by selecting
✝
✆
Exit → Save Changes and Reset
con guration.
7
PXE Boot
If you want to use the genucenter Management Station, you need to boot via PXE. Select
the network interface (IBA GE Slot 0X00 v1513) in the BIOS
options from which the genucenter can be reached.
Figure 10: Inserting smartcard
. The system will prompt you to save or discard the new
S Hardware Rev 3.0
Save & Exit → Boot Override
genua GmbH. All rights reserved.
Save &
15