Hardware Quickstart Guide
4
Methods of Access
Serial console:
Attach the S hardware with the supplied null modem cable to a serial interface on your
ˆ
computer.
Start a serial terminal program (Windows: e.g., PuTTY or SecureCRT. Unix: e.g., tip, cu,
ˆ
minicom or kermit).
Use these default connection settings:
ˆ
115200 Baud
◦
8 bit
◦
No parity (none)
◦
1 stop bit
◦
Hardware ow control
◦
For further information regarding the installation, please use the manuals on our cus-
ˆ
tomer portal: Visit
Please
rst check which version is supported by the hardware before reinstalling the
ˆ
software: Visit
https://kunde.genua.de/en
5
Using a Smartcard
The S hardware can be used with a smartcard. To do so, insert the smartcard (chip up) in
the smartcard slot, as illustrated below.
14
genua GmbH. All rights reserved.
https://kunde.genua.de/en
, log in and click on
, log in and click on
Downloads → Manuals
Downloads → Hardware Info