Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
one end of the discharge hose (E) to the spray cap (G) and the other end to
the outlet fitting (F). Make sure the cover gasket (A) is correctly positioned.
Tighten the cover.
3. Tighten the tank to the housing.
4. Connect the parts of the sprayer tube together as shown in the figure below.
Connect the corrugated tube to the device outlet and connect the straight
tube to the other end. Secure the connections with clamps. Place a handle on
the straight tube, secure it by tightening the screws. Install the last tube, at
the end of which place the sprayer nozzle.
Werbung
Inhaltsverzeichnis
