SmartGyro SMART-HELMET Bedienungsanleitung Seite 21

English
Keep the helmet out of extreme helmet
The helmet will be damaged if you expose it to temperatures
that exceed 150ºF. If the helmet suffers heat damage and
becomes deformed, it must be destroyed and replaced.
Important information
The helmet is designed to absorb the energy of a blow. After a
serious blow, even if the damage is not visible, the helmet
must be destroyed and replaced.
Unfortunately some accidents can result in a head injury that
the helmet cannot prevent. Depending on the type of impact,
even at slow speeds, the injury can be serious. Drive with the
utmost care and be sure to read the entire
Handbook.
38
This helmet has been designed with the intention
exclusively for the use of electric scooters and other
non-motorized vehicles. The helmet should not be adapted to
provide adequate protection for motor sports. No helmet can
protect you from unpredictable impacts.
It is dangerous to modify or remove any of the original
components of the helmet, other than those recommended by
the manufacturer. The helmet should not be adapted for the
purpose of adding accessories in a way that is not
recommended by the manufacturer. The helmet must be
replaced after 3 years, from its date of manufacture.
39