Restraint System - SmartGyro SMART-HELMET Bedienungsanleitung

English
How do I adjust the size of my helmet
To ensure correct use of the helmet, familiarize yourself with its characteristics,
adjustments and pay attention by carefully reading the manual of the helmet
before its first use.
Protection and ventilation
The outer part of the helmet makes it one of the lightest helmets while offering
excellent durability and integrity. Multiple vents with internal air channels to
ensure maximum flow.
Pad adjustment
The helmet must fit properly to be effective. With a correct fit, the helmet should
not move. If the helmet does not fit your head with the pads, simply remove
them and install other pads of a different size, to ensure a correct fit, see
exchanging sizes of the pads until the helmet fits your head.
34

Restraint system

The SmartGyro helmet has a simple, quick-release buckle that makes
it easy to put on and take off without having to adjust the strap
again. The strap must be tight and buckled when worn.
Check which strap is loose. Tighten the strap after removing your
helmet.
To adjust the chin strap, hold the buckle with one hand. Then pull the
excess strap (See Diagram A).
To adjust the back strap, pull the excess strap
from the sides. Hold the helmet with one hand
and with the other hand, hold the strap that
goes under your chin. Now pull back and forth
to adjust the length of the four straps (see
diagram B). The helmet should sit firmly and
level on your head. (see diagram C).
Front Chin Strap
Rear Strap
Front
Rear
Strap 2
Strap 1
Retainer Ring
DIAGRAM A
35