Flashlight - PROTEC.class PSP KLV 12 Bedienungsanleitung

Operation
Thank you for choosing a PROTEC.class
| Non-contact voltage tester from 12 V AC
| High performance LED flashlight
| Vibrates if voltage is detected.
Non-contact voltage test
The PROTEC.class
pable of detecting wires carrying live volt-
ages using its built-in circuits in its tip.
If a voltage of 110 V AC or more is de-
tected, the white cap will glow red (1a) and
the device vibrates. To detect voltages be-
low 110 V AC, switch the flashlight on us-
ing the switch (1b). Now voltages from 12
V AC can be detected.
A flowing current is not required!

Flashlight

Turn on the built-in flashlight with the switch (1b). Using a high-
performance LED a burning time of up to 60 hours per set of bat-
teries is possible! The life of the LED is over 100,000 hours.
Changing the batteries
Insert a screwdriver in to the notch (2) and pry the battery com-
partment cover off. Make sure you insert the batteries the right
way round!
®
PSP KLV 12 is ca-
17
®
PSP KLV 12.