Levenhuk DTX 30 Bedienungsanleitung Seite 3

Recording a video
Click the corresponding icon on the toolbar or select Video from the Capture menu.
The camcorder icon on the toolbar will change once you start recording. To stop recording
you can either click the corresponding icon on the toolbar again or select Stop capturing
from the Capture menu.
Note: recommended video resolution is 640x480.
Preview
Left-click the thumbnail of the image you wish to edit and it will open in the main window
of the application. The image resolution will be displayed in the bottom left corner of the
screen. Double-clicking a thumbnail will open the image in a separate window.
Saving images
To save an image, right-click the thumbnail of the desired image and select Save from the
drop-down menu.Images may be saved in .jpeg and .bmp formats. When saving images in
.jpeg format, clicking Advanced allows you to view and edit additional options.
Deleting images
To delete an image, right-click the thumbnail of the desired image and select Delete from
the drop-down menu.When viewing images in a separate window, you can click the
corresponding icon on the toolbar to delete the image.
Copying images
To copy an image, right-click the thumbnail of the desired image and select Copy
from the drop-down menu.
Calibration and measurements
Place a ruler on the stage, focus your view and aimage. Take note of the current
magnification by looking at the calibration scale on the microscope body. Double-click the
image thumbnail to open it in a separate window. Enter the magnification value into the
corresponding field in the upper right corner of the preview window. Upon calibrating the
microscope, you will be able to measure various parameters of observed specimens. All
the buttons on the toolbar of the preview window are described below.
Line
Press and hold the left mouse button to start drawing a line. Release the left mouse button
to complete the line.
Free-form line
Press and hold the left mouse button and draw a line. Release the left mouse button
to complete the segment. You can continue adding more segments to the free-form line.
4
Radius
Draw a straight line on the image. The application will automatically calculate the radius,
as well as circumference and area of the corresponding circle.
Diameter
Draw a straight line on the image. The application will automatically calculate
the diameter, as well as circumference and area of the corresponding circle.
Angle
Press and hold the left mouse button to draw a line on the image. Release the left mouse
button and draw another line. The application will automatically calculate value
of the resulting angle.
Measurement units
From the drop-down menu on the toolbar you can select measurement units
for calculations (pixels, inches, kilometers, meters, centimeters, millimeters, microns).
Press this button to create a text box on the image
Press this button to edit font parameters
These buttons allow you to draw something on the image
Press this button to choose the line color
Press this button to choose the line thickness
Press this button to choose the line style
Press this button to undo the last action
Note:
1. Magnification range of Levenhuk DTX 50 is 20–400x, and 20–230x for Levenhuk DTX 30.
Do not use magnification values that exceed this range.
2. The application calculates values based on the magnification you have entered.
The results may not be precise.