Paj GPS VEHICLE FINDER2.0 Bedienungsanleitung Seite 25

Please Note:
specialist and competent person. Incorrect installation may invalidate the
A faulty electrical installation or an excessive mains voltage may cause an
electric shock.
Before use, adjust the mains voltage of the socket with the information on

the type plate.
Before use, make sure that the mains voltage of the socket corresponds

with the information on the type plate.
To be able to disconnect the charging cable from the mains as quickly as

possible in the event of a failure, connect the power supply unit where it is
easily accessible.
If you notice any visible damage to your GPS tracker or charging cable, do

not use it.
Use only the original parts supplied to charge the GPS tracker. If the

charging cable is damaged, replace it only with original accessories from
the manufacturer.
Never place the GPS tracker near an open fire or hot surfaces.

The GPS tracker is not protected against humidity and water. Please use

and store it only in a dry environment.
The charging cable should only be used indoors. Keep it away from humidity

and do not kink it.
Do not open the housing of the GPS tracker. Leave the repair to qualified

specialists. However, if you carry out repairs yourself, connect the GPS
tracker incorrectly or operate it incorrectly, liability and warranty claims are
excluded.
WARNING! DANGER OF EXPLOSION AND FIRE!
Below you will find information and instructions on how to use the battery:
The GPS tracker runs by a lithium polymer battery. It is not exchangeable

and must not be removed or opened.
WARNING! RISK OF ELECTROCUTION!
Please ensure that the installation is carried out only by a
operating permit.
Battery mode
Vehicle Finder 2.0 4G by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
Safety
25