Turning On; Use - Paj GPS VEHICLE FINDER2.0 Bedienungsanleitung

Note: When connected to the power supply, the VEHICLE
Finder 2.0 4G switches on immediately and the LED lights
If the FINDER is not connected to the vehicle battery, but at a
different point (e.g. fuse box), this can result in the ignition on
/ off function not being accurately recognized.

2.6 Turning on

After a successful activation you can switch on the VEHICLE
Finder 2.0 4G. By connecting the FINDER to the power supply
the device has already been switched on.
After activation and installation of the device, it is important to
move the FINDER so that a first data record can be sent to
the portal. To do this, simply drive a small round with your
vehicle in which the VEHICLE Finder 2.0 4G is installed.

2.7 Use

Once the activation, switching on and the transfer of a first
database has been successful, you can attach the FINDER to a
location of your choice and view the position of the FINDER
using a smartphone, tablet or PC. Please use our app or go to
the following website:
emit a signal.
1.
Fuse
Vehicle Finder 2.0 4G by PAJ with Online-Tracking V.1.0 EN
© PAJ UG (haftungsbeschränkt)
2.
Black
Battery
2.
Re
d
21
8-32V